[ There are no changes since last time, not because nothing needs to be changed, but rather because I won't have time to do a reasonable job of it for a few weeks. Better to hold off 'til next month. ++ATM ] Send corrections and updates to Andy McFadden (fadden@netcom.com). If you have a question you'd like to see answered in here, either post it to one of the comp.publish.cdrom newsgroups (if you don't have the answer), or send it to fadden@netcom.com (if you do). If you're reading this on a web page and want to check out the newsgroups (which have maintained a fairly high signal-to-noise ratio), see: news:comp.publish.cdrom.hardware news:comp.publish.cdrom.software news:comp.publish.cdrom.multimedia Text versions of this FAQ are available from ftp://rftm.mit.edu/. HTML versions are available on various sites, including the CD Information Center at http://www.cd-info.com/CDIC/Technology/CD-R/FAQ.html. Contents ======== [0] Introduction [0-1] Legal noise (disclaimers and copyrights) [0-2] What's new since last time [1] Basics [1-1] What's CD-R? [1-2] Are they identical to normal CDs? [1-3] Can I use it to copy my CDs? [1-4] How much can they hold? [1-5] Can I just copy files onto a CD-R like I would to a floppy? [2] CD Encoding [2-1] How is the information physically stored? [2-2] What is XA? CDPLUS? CD-i? MODE1 vs MODE2? Red/yellow/blue book? [2-3] How do I know what format a disc is in? [2-4] How does CDROM copy protection work? [2-5] What are subcode channels? [2-6] Are the CD Identifier fields widely used? [2-7] How long does it take to burn a CD-R? [3] How Do I... [3-1] How do I copy a data CD? [3-1-1] Why can't I just do a block copy like a floppy? [3-2] How do I extract tracks from or copy all of an audio CD? [3-3] How do I avoid clicks on audio CDs? [3-4] How do I copy Sony Playstation, Sega Saturn, or 3DO discs? [3-5] How do I get long filenames onto a disc? [3-5-1] ISO-9660 [3-5-2] Rock Ridge [3-5-3] HFS [3-5-4] Joliet [3-5-5] Romeo [3-5-6] ISO/IEC 13346 and ISO/IEC 13490 [3-6] How do I use a CD-i disc on a PC? [3-7] How can I extract disc and track titles from an audio CD? [3-8] How do I copy an 80-minute CD? [3-9] How do I create a PhotoCD? [3-10] How do I make a CD that will work on a PC or a Mac? [3-11] How do I get at different sessions on a multi-session CD? [3-12] How do I transfer my records or cassettes to a CD? [3-13] How do I transfer an audio DAT tape to CD? [3-14] How do I put audio and data on the same CD? [3-15] How do I make a bootable CD? [3-16] How do I convert home videos into MPEG or QuickTime for CD? [3-17] How can I burn several discs at the same time? [4] Problems [4-1] What does "buffer underrun" mean? [4-2] I can't get long Win95 filenames to work right [4-3] I can't read the multisession CD I just made [4-4] Write process keeps failing N minutes in [4-5] Why did my CD-R eject between the "test" and "write" passes? [4-6] My CDROM drive doesn't like *any* CD-R discs [4-7] How do I avoid having a ";1" on my ISO-9660 discs? [4-8] I keep getting SCSI timeout errors [4-9] I'm having trouble writing a complete disc [4-10] Getting errors reading the first (data) track on mixed-mode CD [4-11] My CD-R ejects blank discs immediately [4-12] I'm getting complaints about power calilbration [4-13] My Adaptec 2940 pauses after finding my CD-R [5] Hardware [5-1] Which CD-R unit should I buy? [5-1-1] Yamaha [5-1-2] Sony [5-1-3] Smart & Friendly [5-1-4] Philips [5-1-5] HP [5-1-6] Plasmon [5-1-7] Kodak [5-1-8] JVC [5-1-9] Pinnacle [5-1-10] Ricoh [5-1-11] Pioneer [5-1-12] Olympus [5-1-13] Optima [5-1-14] Mitsumi [5-1-15] DynaTek Automation Systems [5-1-16] Microboards of America [5-1-17] Micro Design International [5-1-18] MicroNet Technology [5-1-19] Procom Technology [5-1-20] Grundig [5-2] How long do CD-R drives last? [5-3] What kind of PC is recommended? [5-4] What kind of Mac is recommended? [5-5] Which standard CDROM drives work well with CD-R? [5-6] What kind of HD should I use with CD-R? Must it be AV-rated? [5-7] What kind of SCSI adapter should I use with CD-R? [5-8] Can I use a CD-R as a general-purpose reader? [6] Software [6-1] Which software should I use? [6-1-1] Adaptec - Easy-CD, Easy-CD Pro, and Easy-CD Pro MM [6-1-2] Adaptec - CD-Creator [6-1-3] Elektroson - GEAR [6-1-4] Astarte - TOAST CD-ROM Pro [6-1-5] CeQuadrat - WinOnCD ToGo [6-1-6] Young Minds, Inc. - SimpliCD [6-1-7] ? - CD-Producer [6-1-8] Jeff Arnold - CD utilities [6-1-9] Optical Media International - QuickTOPiX [6-1-10] Creative Digital Research - CDR Publisher [6-1-11] mkisofs [6-1-12] Asimware Innovations - MasterISO [6-2] What other useful software is there? [6-2-1] Optical Media International - Disc-to-Disk [6-2-2] Gilles Vollant - WinImage [6-2-3] Asimware Innovations - AsimCDFS [6-2-4] Steven Grimm - WorkMan [6-2-5] Adaptec - Easy-CD Backup [6-2-6] Hohner Midia - Red Roaster [6-3] What is packet writing software? [7] Media [7-1] What kinds of media are there? [7-2] Does the media matter? [7-3] Who manufactures CD-R media? [7-4] Which kind should I use? [7-5] How long do CD-Rs last? [7-6] How much data can they hold? [7-7] Is it okay to stick a label on the disc? [7-8] What are audio CD-Rs? [7-9] How do CD-Rs behave when microwaved? [7-10] What can I do with CD-R discs that failed during writing? [8] Net Resources and Vendor Info [8-1] Information resources [8-2] Magazines and other publications [8-3] Net.vendors [9] Contributors ------------------------------------------------------------------------------ Subject: [0] Introduction Subject: [0-1] Legal noise (disclaimers and copyrights) Free distribution of this FAQ is encouraged, as are conversions to HTML or other formats, so long as no content is removed, and additions are clearly marked. Distribution on the Microsoft Network by permission only. Caveat lector: the information here is derived from Usenet postings, e-mail, and information on WWW sites. As such, it may well be DEAD WRONG, and you are encouraged to verify it for yourself. I take no responsibility for damaged hardware, CD-Rs turned into coasters or frisbees, time lost, or any other damages you incur as a result of reading this FAQ. Information on specific models of hardware and software are based on *opinions* of other users, not scientific studies. I am not an expert in this (or any other) field. Everything here could be a total malicious lie, and should be treated as such. You have been warned. I don't get paid to plug anybody's software or equipment. The sections on "what XXX should I buy" are not here because I want to sway purchases one way or another, they're here because the questions are asked *a lot*, and the answers are pretty consistent. You are invited and encouraged to investigate the capabilities and reputations of all products. The various product and company names are trademarks of their respective companies. Subject: [0-2] What's new since last time I've gotten a few questions about burning multiple discs in parallel from a single source, so there's a new section for that. Made minor changes hither and yon. ------------------------------------------------------------------------------ Subject: [1] Basics These are intended to be brief (if somewhat incomplete) answers to basic questions. More detailed information can be found later in the FAQ. Subject: [1-1] What's CD-R? CD-R is short for "CD Recordable". Recordable CDs are WORM (Write Once, Read Multiple) media that work just like standard CDs. The advantage of CD-R over other types of optical media is that you can use the discs with a standard CD player. The disadvantage is that you can't reuse a disc. A related technology called CD Rewritable (a/k/a CD-E or CD Erasable) is expected to be available in late 1996. These discs will work like CD-Rs, but will be erasable as well. Subject: [1-2] Are they identical to normal CDs? The CDs you buy in a store are pressed from a mold. CD-Rs are burned with a laser. They look different (green or gold instead of silver), they're less tolerant of temperature and sunlight, and don't last as long. (But they still last a very long time.) Subject: [1-3] Can I use it to copy my CDs? Yes, both audio and data CDs can be duplicated. Bear in mind that most CDs are protected by copyright laws. You are allowed to make an archival backup of software, but the same doesn't necessarily hold true for music. http://www.spies.com/~eric/bad_laws/dat_tax.html has some relevant information and pointers. Subject: [1-4] How much can they hold? About 74 minutes of audio, which is about 650MB of data. Subject: [1-5] Can I just copy files onto a CD-R like I would to a floppy? Not really. The process is usually a bit more involved than that, and requires special software that (usually) comes bundled with the drive. Some software does allow you to drag-and-drop, but it isn't widely used. You don't need to write everything all at once, but when you're doing the writing you can't interrupt the drive, and you can't reclaim the space you've used. A certain amount of space is lost every time you stop and start again. ------------------------------------------------------------------------------ Subject: [2] CD Encoding CD fundamentals. Subject: [2-1] How is the information physically stored? From The Compact Disc Handbook, 2nd edition" by Ken Pohlmann (ISBN 0-89579-300-8): "Write-once media is manufactured similarly to conventional playback-only discs. As with regular CDs, they employ a polycarbonate substrate, a reflective layer, and a protective top layer. Sandwiched between the substrate and reflective layer, however, is a recording layer composed of an organic dye. .... Unlike regular CDs, a pre-grooved spiral track is used to guide the recording laser along the spiral track; this greatly simplifies recorder hardware design and ensures disc compatibility." A laser in the CD recorder creates a series of holes in the disc's dye layer called "pits". The spaces between the pits are called "lands". The pattern of pits and lands on the disc encodes the information and allows it to be retrieved on an audio or computer CD player. See the net references section for pointers to more data (especially http://www.cd-info.com/). http://www.araltd.com/whatscdr.html has some nice pictures. Subject: [2-2] What is XA? CDPLUS? CD-i? MODE1 vs MODE2? Red/yellow/blue book? See the net references section for pointers. The "information" frame in http://www.cdarchive.com/info/default.htm has useful data, as does http://www.cd-info.com/ and the alt.cd-rom FAQ pages. The page http://emf.net/~mal/cdplus.html is dedicated to CD Plus. A quick summary of standards: Red Book = physical format for audio CDs (a/k/a CD-DA) Yellow Book = physical format for data CDs Green Book = physical format for CD-i Orange Book = physical format for recordable CDs Part I = CD-MO (Magneto-Optical) Part II = CD-WO (Write-Once; includes "hybrid" spec for PhotoCD) White Book = format for VideoCD Blue Book = CD Extra (occasionally used to refer to LaserDisc format) CD Extra = a two-session CD, 1st is CD-DA, 2nd is data (a/k/a CD Plus) CDROM/XA = eXtended Architecture, a bridge between Yellow Book and CD-i MODE-1 = standard Yellow Book sectors MODE-2 = may be of form-1 or form-2 FORM-1 = 2048 bytes of data, with error correction, for data FORM-2 = 2324 bytes of data, no ecc, for audio/video ISO 9660 = file layout standard (formerly called High Sierra) Rock Ridge = extensions allowing UNIX stuff like long filenames and symlinks In case the above seems straightforward, Yellow Book actually defines both mode 1 and mode 2, where mode 2 contains 2336 user data bytes. Green Book defines mode 2 form 1 and form 2. This means that mode 2 sectors may be "formless" and are sometimes called Yellow Book mode 2. Subject: [2-3] How do I know what format a disc is in? You can usually tell by looking at the packaging and/or the disc itself: - CD-DA discs will have a "Compact Disc Digital Audio" logo; - CD+G discs will have the words "CD Graphics"; - CD-i discs will have a "Compact Disc Interactive" logo; - VideoCD discs will have a "Compact Disc Digital Video" logo and/or the words "VideoCD". Subject: [2-4] How does CDROM copy protection work? There are several possibilities; as yet no developers have come forward and announced what they're doing (for obvious reasons). One possible implementation, given sufficient control over the reader and mastering software, is to write faulty data into the ECC portion of a data sector. Standard CDROM hardware will automatically correct the "errors", writing a different set of data onto the target disc. The reader then loads the entire sector as raw data, without doing error correction. If it can't find the original uncorrected data, it knows that it's reading a "corrected" duplicate. Subject: [2-5] What are subcode channels? There are eight subcode channels (P,Q,R,S,T,U,V,W). The exact method of encoding is beyond the scope of this FAQ, but it should be noted that the data is distributed uniformly across the entire CD, and each channel can hold a total of about 4MB. The P subcode channel can be controlled with the JVC/Pinnacle recorders, but apparently isn't used for much. The Q subcode channel includes useful information, which can be read and written on many recorders. The user data area contains three types of subcode-Q data: position information, media catalog number, and ISRC code. Other forms are found in the lead-in, and are used to enable multisession and describe the TOC (table of contents). The position information is used by audio CD players to display the current time, and has track/index information. This can be controlled when doing Disc-At-Once recording. The ISRC (International Standard Recording Code) is used by the recording industry. It states the country of origin, owner, year of issue, and serial number of tracks, and may be different for each track. It's optional; many CDs don't use this. The media catalog number is similar, but is constant per disc. Note these are different from the UPC codes. The other subcode channels are generally inaccessible and unused, with the exception of CD+G (CD w/graphics, supported by SegaCD among others). A new use for channels R-W has been devised by Philips, called ITTS. It enables properly equipped players to display text and graphics on Red Book audio discs. For more details, see the book by Pohlmann mentioned in section 2-1, or _The Art of Digital Audio_, 2nd edition, by John Watkinson, Focal Press, 1994, ISBN 0-240-51320-7. Subject: [2-6] Are the CD Identifier fields widely used? At present, not many manufacturers use them, and not all devices can read all of the fields. Subject: [2-7] How long does it take to burn a CD-R? It depends on how much data you're going to burn, and how fast your drive is. Burning 650MB of data takes about 74 minutes at 1x, 37 minutes at 2x, and 19 minutes at 4x, but you have to add a minute or two for "finalizing" (sometimes known as "fixating") the disc. Remember that single speed is 150KB/sec, double speed is 300KB/sec, and so on. If you have half the data, it will finish in (about) half the time. ------------------------------------------------------------------------------ Subject: [3] How Do I... This is general information about recommended ways to do specific tasks. Subject: [3-1] How do I copy a data CD? Several publishers have CD-to-CD copiers. Two low-cost versions are Adaptec EZ-SCSI, which comes with a simple CD copier called "CD Copier", and Jeff Arnold's freeware CD2CD. The easiest and most reliable method to make copies of single-track data CDs is also the least expensive: CD2CD runs under DOS and works very well with a wide variety of hardware. Software such as Arnold's and Adaptec's will allow you to make a CD image on a hard drive that can then be written to multiple CDs. The fancier packages will usually provide a way to do this as well, but the software tends to be more complicated and harder to use. It's important to remember that, when copying directly from one CD to another, the source MUST be faster than the target, and must be error-free. If the source pauses or spins down to read a marginal area of the disc, the target may outrun the source, and the CD-R will only be useful as a frisbee. Most programs have a "test write" feature that put the CD-R device into a mode where it goes through all the motions but doesn't actually write anything; it's a good idea to do this right before copying. Subject: [3-1-1] Why can't I just do a block copy like a floppy? CDs don't have circular tracks. They're laid out on a spiral, with multiple sessions composed of multiple tracks composed of sectors, and the data in the sectors is interleaved. The sector format is standard, but there's more than one standard. ("That's the great thing about standards... there's so many to choose from." -- unknown) The ability to read certain portions of a CD depends on the CD firmware. Some CD players aren't capable of understanding multi-session discs or of reading audio tracks as digital data. Subject: [3-2] How do I extract tracks from or copy all of an audio CD? To copy from CD to CD, the source drive needs to support digital audio extraction, which is rather rare among older drives. A copier such as Adaptec's "CD Copier" will copy the CD track-by-track, while one like Jeff Arnold's "snapshot" will use disc-at-once recording. If you're just interested in extracting digital audio, you don't even need a CD-R unit, just a CDROM drive that supports it and some software. See http://www.tardis.ed.ac.uk/~psyche/pc/cdrom/CDDA.html for information and software. Different drives can extract digital audio at different speeds. For example, the Plextor 6Plex can extract audio at 6x, while the NEC 6Xi can only extract at 1x. It should be pointed out that, while digitally extracted audio is an exact copy of the data on the CD, it's an exact copy as your CD player perceives it. Different drives will extract slightly different data from the same disc. The differences are usually inaudible, however. The quality of the CD-R audio output depends mostly on how well your CD player gets along with the brand of media you're using. See the next section for some comments about avoiding clicks and pops. One minor note: the data on audio CDs is stored in "Motorola" big-endian format, with the high byte of each 16-bit word first. AIFF files also use this format, but WAV files use "Intel" little-endian format. Make sure your software deals with the endian-flipping correctly. Subject: [3-3] How do I avoid clicks on audio CDs? You should use disc-at-once recording. Track-at-once writes some extra run-in and run-out sectors, which may end up getting played by audio CD players as a click. You need to copy all of the tracks to a hard drive, and then write them all at once using a program like Arnold's DAO.EXE or Adaptec's Easy-CD Pro 95. If you're using track-at-once recording, and are getting a short click at the *start* of every track, then your recording software is probably writing the sound file with the headers still on it. You should either use a smarter program, or remove the header manually (for a .WAV file it's the first 44 bytes). If you are getting clicks in the middle of a track, they are either being added when pulling the data off the disc or when writing it. If the .WAV (AIFF on the Mac) file plays without clicks, then your CD recorder may be suffering from buffer underruns during the write process. If there are clicks in the copy on your hard drive, then your method of extracting audio is flawed (see section (3-2)). If you are getting clicks at the end of a track, it's possible that the software used to create the .WAV file put some information at the very end (which is legal but not recognized by some CD-R software). See section (3-12) for tips on using CoolEdit to remove the data. Some CDROM and CD-R drives have trouble extracting digital audio at high speed, so if you're getting lots of clicks and pops when extracting you should try doing it at a slower speed. You may also run into trouble if you try to extract faster than your hard drive can write. One user found that he was able to eliminate clicks and pops by defragmenting his hard drive. If you must use track-at-once, make sure you're writing it all in one session. Most audio players won't see anything past the first session. Subject: [3-4] How do I copy Sony Playstation, Sega Saturn, or 3DO discs? Jeff Arnold has a utility called "snapshot" for doing this; see his web page at http://www.mainstream.net/~jarnold/cdrom/cdrom.html. Note that this software does NOT defeat the copy protection. Subject: [3-5] How do I get long filenames onto a disc? There are several different ways, most of which make the disc unreadable on many systems. The next few sections discuss the various methods. Subject: [3-5-1] ISO-9660 Level 1 ISO-9660 defines names to be the familiar 8+3 convention that MS-DOS users have suffered through for many years: eight characters for the name, a period ("full stop" for those of you in the U.K.), followed by three characters for the file type, all in upper case. Many special characters (space, hyphen, tilde, equals, and plus) are forbidden. There's also a file version number, separated from the name by a semicolon, but it's often ignored. Level 2 ISO-9660 allows longer filenames and deeper directory structures (32 levels instead of 8), but isn't usable on some systems, notably MS-DOS. Subject: [3-5-2] Rock Ridge The Rock Ridge extensions to ISO-9660 define a way for UNIX-isms like long mixed-case filenames and symbolic links to be supported. Because it's still an ISO-9660 filesystem, the files can still be read by machines that don't support Rock Ridge; they just won't see the long forms of the names. Rock Ridge is supported by UNIX systems and the Mac. DOS and Windows currently don't support it. Subject: [3-5-3] HFS HFS is the Hierarchical File System, used by the Macintosh. This is used in place of the ISO-9660 filesystem, making the disc unusable on systems that don't support HFS. At present, the only systems that can read HFS CD-ROMS are Macs, Amigas (with AmiCDROM, available from ftp://ftp.cdrom.com/pub/aminet/disk/cdrom/), and the Apple IIgs. Some authoring packages for the Mac and Windows allow the creation of "hybrid" CDs that have both an ISO-9660 filesystem and an HFS filesystem. Subject: [3-5-4] Joliet Microsoft, being Microsoft, created their own standard called "Joliet". This is currently supported by Win95 and WinNT. It's useful when doing backups from Win95 onto a CD-R, because the disc is still readable as ISO-9660 but shows the long filenames under Win95. Subject: [3-5-5] Romeo Adaptec's software allows creation of discs in "Romeo" format. It's not clear how widely this is supported. Subject: [3-5-6] ISO/IEC 13346 and ISO/IEC 13490 These are new standards intended to replace ISO-9660. So far they're not widely used. See http://www.mv.com/users/kaikow/. Subject: [3-6] How do I use a CD-i disc on a PC? Short answer: you don't, unless you have a CD-i add-on board. Even if you have a CD reader compatible with the CD-i (Green Book) standard, there are still a number of obstacles in your way. The filesystem used isn't ISO-9660, and CD-i players are based around a 680x0 CPU and have special hardware for video and audio. Longer answer: it depends on what kind of disc it is, and what you mean by "use". PhotoCD and VideoCD discs are CD-ROM/XA "Bridge Format" discs that play on CD-i players as well as dedicated players and computers. These use the ISO-9660 file system, and can be read with commonly available PhotoCD software and MPEG-1 players. DigitalVideo discs from Philips manufactured before June, 1994 are in CD-i format, not VideoCD format, and require additional hardware to be played on a PC. If your CD-ROM drive supports raw 2352-byte sector reads, it's possible to pull tracks off of a Green Book format disc, and extract audio or MPEG video data. Subject: [3-7] How can I extract disc and track titles from an audio CD? Typical Red Book audio CDs don't have this information. Software audio CD players like those provided by Adaptec or Microsoft require you to type in the information, which is then stored in a database on your hard drive. Some FTP sites carry databases full of CD info. Some newer formats, like CD Extra, allow or even require such information to be included on the CD. Subject: [3-8] How do I copy an 80-minute CD? Since CDs are written in a spiral, the amount of data you can get on a disc is affected by how tightly spaced the "groove" is. A standard Red Book CD is designed to allow at most 74 minutes 33 seconds of audio data. By using a tighter spacing on the "groove" on the glass master, or by adjusting the sizes of the "pits" and "lands", manufacturers can get more data onto the disc, but this may make it harder for some CD readers to use the discs. CD-R's have a pre-formed spiral track, and the sector addresses are hard-coded into CD-R media, so there's no flexibility. (Apparently there HAVE been sightings of 81-minute CD-R blanks, but they're very expensive.) It may be possible to create a 77-minute CD by suppressing the leadout, but it's not clear if this is easy or even a good idea. Subject: [3-9] How do I create a PhotoCD? You need special software, like Adaptec's Photo Theatre or Corel CD Creator 2. Not to mention a way to get your images digitzed in the first place. Digital cameras like the Apple QuickTake will work, as will video capture boards or frame grabbers. Subject: [3-10] How do I make a CD that will work on a PC or a Mac? If it's just a disc full of data (like JPEG images), writing the disc in minimal ISO-9660 should work. You may have to master it without the volume number (e.g. ";1") at the end of the name. If you need the format to be more flexible, perhaps with separate executables for Macs and PCs, you'll want to build a "hybrid" CD that has two sets of files on it. Astarte's Toast for the Mac is widely recommended for this. See section 6 for other options. Subject: [3-11] How do I get at different sessions on a multi-session CD? As always, it depends. MS-DOS lets you see the first data session. Win95 lets you see the last data session. Some drivers from Corel will let you choose which session you see. Some CD creation software (e.g. Adaptec Easy-CD Writer) writes a complete table of contents in each session, some of which refers back to the files from the previous session, allowing a form of incremental backup. (This will work for ISO-9660 discs, but won't work for HFS. However, this is less painful that it seems because a properly-configured Macintosh will let you mount all the sessions as individual volumes.) Adaptec's Easy-CD Pro will allow you to combine the contents of several previous sessions by creating a new session (use RCD's Load Contents option to read the file/directory info from more than one session, then write and close a new session with that directory structure). Some of it depends on the SCSI driver you have installed. Subject: [3-12] How do I transfer my records or cassettes to a CD? For a nice introduction, see http://www.octave.com/octave/audiocd.html. You need to connect the analog output from your record player through a pre-amp (which both pre-amplifies the signal and equalizes it to RIAA standards) to a board in your PC that can digitize analog audio and store it on your hard drive. You can use the A/D (analog-to-digial) converter built into a sound card like a SoundBlaster 16, but the sound quality will not be very good. The sound cards from Turtle Beach (Tropez, Tahiti, and CrystaLake) are a step up, and a Digital Audio Labs CardD+ is about as good as it gets for internal A/D cards. If you're really serious, you should get an external A/D converter such as the Symetrix 620, and feed the digital output from that into the computer (another way of accomplishing the same thing is to record to an audio DAT tape and then use the digital output on the DAT recorder; see the next section for details). During playback, try to get as much signal as possible. Normalization will bring the signal level up, but can't replace parts of the signal that were lost. Sound editing utilities, such as GoldWave or Cool Edit, can be used to equalize, normalize, and even perform noise reduction on your recordings. The following method has been suggested for PC users: - Record directly into Cool Edit, using the highest possible input level that doesn't exceed the maximum. - In the "noise reduction" dialog, set FFT size to 8192, FFT precision to 10, and #of samples to 96. - Select a silent passage between songs or from the end of the record. It can have some crackling but no huge pops. Set the noise level. - Select the entire track and perform noise reduction at about 70%. - Select the entire track and normalize it. - Manually remove any big pops (easily located by zooming in to the general area and switching to "spectral view" in the edit menu) by zooming in on them and amplifying them to about 8%. You only need to select the channel (left or right) in which the offending data occurs. If it occurs across BOTH channels, you may get a better result by deleting that part of the track and reconstructing it in such a way that it remains smooth... if that's not possible, make one channel smooth and then amplify the other to 8%. Cool Edit currently leaves a blob of data at the end of the .WAV file, which is legal in the file format but not expected by some utilities. To avoid this, go into the "Options" menu and select "Info". There is a check box here labelled "Fill * fields automatically" that is checked by default. Uncheck the box, and don't put any information into those fields. Bear in mind that CD audio is 16-bit stereo at 44KHz, and will chew up disk space in a hurry. See section 3-3 for some tips on avoiding clicks when committing the audio to CD. For those of you wondering what the deal with pre-whatever is, this little tidbit is courtesy mikrichter@interramp.com: "Preemphasis has been used since the earliest days of commercial recording. In general, the high-frequency content of the music (or whatever) being recorded is low and the noise is high. Therefore, treble was boosted and lows were cut by a preemphasis curve which was removed in playback. The standard RIAA curve for turnover and rolloff (the amount and frequency for treble and bass, respectively) was not accepted universally until the 50's, and some fine preamps offered selectable values with presets for the common curves into the early transistor era." Subject: [3-13] How do I transfer an audio DAT tape to CD? Buy a card that will allow you to go from DAT to hard disk digitally. Make sure you get one that can handle the same digital standard the DAT recorder uses, i.e. S/PDIF (Sony/Phillips Digital Interface Format, sometimes referred to as "domestic") or AES/EBU ("professional"). Possible solutions for the PC are the DigiDesign AudioMedia, the Zefiro Acoustics ZA2 (see http://archive.uwp.edu/zefiro), the AdB Digital Multiwav Pro (see http://www.adbdigital.com), or the Digital Audio Labs CardD+ (see http://www.digitalaudio.com/products.htm). The latter comes highly recommended. Record from the DAT onto your hard drive, and then record the CD from there. If you try to do it directly you'll likely end up with a lot of wasted CD-Rs due to buffer underruns or minor mistakes. You should use Disc-At-Once recording for best results; Jeff Arnold's DAO software is recommended for this on the PC. There ARE CD-R drives that have analog inputs, but you probably don't want one. See section (7-8). If you're interested in mastering production audio CDs, you should check out http://www.sadie.com/. Subject: [3-14] How do I put audio and data on the same CD? There are two ways to do this. The first is to put the data on track 1 of the CD, and audio on the next several tracks. The CDROM drive will automatically look at track 1 and ignore all other tracks, so you'll be able to get at the data and -- depending on the operating system -- will be able to play the audio tracks. Remember that all of the tracks, both audio and data, need to be recorded in a single session. See section (3-2). The down side of this is that audio CD players may attempt to play track 1, which can be obnoxious or downright harmful to audio equipment. Most modern CD players are smart enough to ignore data tracks, so this won't usually be a problem. The other approach is to create a multisession disc with the audio tracks in the first session and the data track in the second. This is how CD Extra (the format formerly known as CD Plus) works. Audio CD players only look at the first session, and CDROM drives are (supposed to) start with the last session, so it all works out. Depending on your operating system, you may have trouble seeing both sessions at once. Subject: [3-15] How do I make a bootable CD? On a Mac, this appears to be straightforward. On a PC, it's a bit more of a challenge. The BIOS on some machines supports bootable CDs. Phoenix (the BIOS developer) has created the El Torito standard for doing this sort of thing. You can find specifications and a "how to" guide at http://www.ptltd.com/techs/specs.html. CDR Publisher can make bootable CDs for PCs and UNIX. See section (6-1-10). Subject: [3-16] How do I convert home videos into MPEG or QuickTime for CD? This topic is largely outside the scope of this FAQ, so I'm not going to go into much depth. The Usenet group rec.desktop.video is more applicable. I'm not aware of an FAQ for that group, but the links found at http://www.cris.com/~videoguy/jump.htm will get you started. You need a capture card to transfer the video to your hard drive. Capturing video will eat up 2MB or more per *second* of video at full resolution (640x480x24 at 60 fields per second for NTSC) with a reasonable degree of compression, so this isn't something to be undertaken lightly. The lower your quality requirements, the lower the bandwidth requirements. If MPEG is your only interest, you might be better off with an MPEG-only card rather than a hobbyist video capture board. http://www.b-way.com/ and http://www.darvision.com/ are good places to look. Once you've captured the video, you'll probably want to edit it (at least to clip out unwanted portions or add titles). Packages for doing this, like Adobe Premiere and Ulead MediaStudio, are usually included with the capture card. These will also let you adjust the resolution, color depth, and compression quality to output the video so that it's suitable for playback on double- or quad-speed CDROM drives. You can convert AVI files to MPEG and vice-versa with a program from Ulead (see http://www.ulead.com/). You should be able to create QuickTime or AVI movies using the compression codec of your choice from the video editing software. If you're running Linux you should take a look at Bernhard Schwall's "avi2yuv" program. It converts M-JPEG movies created with popular video capture boards into a format accepted by the Berkeley MPEG-1 and MPEG-2 encoders. The README for avi2yuv lists the additional software packages (all of which are free and run under Linux) needed for creating MPEG movies complete with sound. Most (all?) of the utilities can also be built to run under DOS. Finally, you should be aware that MPEG playback is rather CPU intensive, and it's possible to create movies that don't play very well without hardware support. The current version of "Sparkle" for the Macintosh doesn't handle MPEGs with audio, and the current version of "xanim" for UNIX doesn't handle B or P frames (i.e. it's pretty useless for looking at images that are compressed well). Bear this in mind before investing in MPEG hardware. Subject: [3-17] How can I burn several discs at the same time? There are no software-only solutions available. You can't just go out and buy six units off the shelf, drop them on your SCSI bus, and start burning multiple discs in parallel. There are several hardware-based solutions to this, including CD-R units that support daisy-chaining, and control units that vary from the simple (a handful of units wired together) to the complex (robotic arms to move discs around). Most cost more than a Hyundai. See http://www.cd-info.com/CDIC/Technology/CD-R/duplication.html for an excellent overview of several different systems. ------------------------------------------------------------------------------ Subject: [4] Problems Problems that arise when burning a CD-R. Subject: [4-1] What does "buffer underrun" mean? It means you have an attractive new coaster for your table. The CD writing process can't be interrupted in mid-session. To prevent this from happening, the makers of CD recorders put a write buffer in the drive, usually 512K or 1MB. Data read from the hard drive, tape, or another CD is stored in the buffer, and pulled out as needed by the recorder. If the recorder requests data from the write buffer, but there's none there, it's called a buffer underrun. The disc is still spinning, but there's no data to write, so the recording process aborts. You can still use the disc with multisession CDROM drives by closing the session and starting another, assuming there's enough space left on the CD, and assuming your pre-mastering software didn't choose to finalize the disc for you. Advice for preventing buffer underruns is scattered throughout this FAQ. A brief summary: - Use a fast, AV-friendly hard drive (i.e. one that doesn't do slow thermal recalibrations). - Record at a slow speed - it takes longer to empty the buffer when recording at 1x. - Don't do anything else with the computer while recording. Don't record from a file server! - Defragment your HD, especially if you're doing on-the-fly recording. - Record from an ISO image file rather than on-the-fly. - Depending on your setup, putting the recorder and your hard drive on separate SCSI controllers may be necessary. Also watch out for things like anti-virus programs that wake up, virtual memory settings that cause swapping, screen savers that activate during the CD creation process, unusual network activity, and background downloads of data or faxes. Subject: [4-2] I can't get long Win95 filenames to work right Typical symptoms can be described like this: - Works fine in Win95 Explorer - Under DOS the directories are visible, but instead of "dirname1" you get "dirname57". Attempting to read them results in errors. - Typing 'cd dirname~102' may fail while 'cd "Long File Names without the ~"' will work. It appears that Win95 and DOS 7.x are simply screwed up. Subject: [4-3] I can't read the multisession CD I just made The SCSI driver needs to believe that the CDROM drive can handle multisession discs. Most likely you will need to update your SCSI drivers before this will work. (This problem was reported with an HP4020i and a Buslogic BT946C controller; if you have an HP drive you should get the c4324hlp.vxd driver from the HP web site. See section 6 for the address.) Also, if the final session on the CD isn't closed, standard CD players may become confused (the NEC 6Xi certainly does under Win95). This doesn't mean that the *disc* must be closed, just that the *session* must be closed. (Actually, the NEC 6Xi doesn't like open discs either... sigh.) Subject: [4-4] Write process keeps failing N minutes in There's a couple of possibilities. One is that your data source can't keep up with the CD-R; try using disc-at-once writing from an ISO image with the speed set to 1x. If it seems to be getting worse over time, you may just need to defragment your hard drive. If that fails, a number of people have discovered that the problem is a faulty CD-R unit (similar behavior has been reported on Sony and HP units, which have different mechanisms). You should try 1x writing from a fast source and with different sets of data before contacting the manufacturer, since they will likely tell you to do exactly that anyway. Be sure that there aren't environmental factors creating difficulties. CD-R units are usually built to handle small shocks, but having a set of speakers playing loud music on the same table as a CD-R may cause it to skip, resulting in a failed write. Sonic booms, heavy construction equipment, and nuclear detonations may have similar effects. It's also possible that you simply have a bad batch of media. Try a different type and brand of disc. Some distributors (e.g. dataDisc) will exchange media that's provably defective. Subject: [4-5] Why did my CD-R eject between the "test" and "write" passes? Most CD recorders need to clear their memory between the "test" pass and the "write" pass. For some recorders, the only command that does this is "eject". If the recorder has a tray it just goes out and back in, but if it uses a caddy manual intervention is needed. Some CD-R packages allow you to start the real write pass a few seconds after the test pass has succeeded. They may not disable this even though they know that the disc will have to be ejected. Make sure the option is set to "wait until told to continue." Subject: [4-6] My CDROM drive doesn't like *any* CD-R discs A very simple test is to take a CD that DOES work, copy it, and try both (this ensures that your problems aren't being caused by, for example, a drive that doesn't support multisession CDs). If it fails with both green and gold media, chances are your drive simply doesn't work with CD-R discs. This is rare but not unheard of. In one case, returning the drive for an identical unit solved the problem. Subject: [4-7] How do I avoid having a ";1" on my ISO-9660 discs? The ISO-9660 standard says the version number (a semicolon followed by a number at the end of every filename) has to be there. Most operating systems simply ignore it, but until recently the Mac didn't, causing some problems. (For the Mac, look at "ISO 9660 File Access" in the System:Extensions folder with Command-I. If the version shown is 5.0 or greater, your system should handle the version numbers just fine. If not, you should update your system software.) Subject: [4-8] I keep getting SCSI timeout errors The advice given to someone with a Philips CDD2000 (same mechanism as HP4020i) with an Adaptec SCSI controller was: - Put the writer on SCSI ID 2 - Turn off Fast SCSI, SCSI Linking, SCSI Disconnect, etc for the writer Subject: [4-9] I'm having trouble writing a complete disc This was happening frequently with the HP4020i running off an AdvanSys SCSI card under Win311 (i.e. WfWG). The solution here was to remove IFSHLP.SYS from the CONFIG.SYS. (IFSHLP.SYS is somehow involved with 32-bit file access and network support, so you may have to disable both of these before disabling IFSHLP. You may have better luck under Win95.) Another user with the same setup found that doing power-up diagnostics and device reset right before burning the CD helped. Subject: [4-10] Getting errors reading the first (data) track on mixed-mode CD There's a 150-sector postgap at the end of the data track. Some programs deal with this automatically, some don't. If you're getting errors, try subtracting 150 from the total number of sectors to read for that track. Subject: [4-11] My CD-R ejects blank discs immediately There are a couple of possibilities, one software and one hardware. It may be that the system is looking at the disc, not finding a TOC (table of contents), and ejecting it as useless. You need to disable this. Under Win95, disable auto insertion in the "CDROM" item of the "system" section of the control panel. On the Mac, you may just need more recent drivers. If that doesn't work, make sure the CD-R drive is perfectly level. Apparently some units are sensitive to being tilted at an angle. If nothing helps, there's a strong possibility that the drive is mis- aligned and needs to be serviced. This has been known to happen to drives during shipping. One user reported problems when using the wrong type of caddy. It has to be a Sony-type caddy, which is the kind most commonly found in stores. Subject: [4-12] I'm getting complaints about power calilbration The power range of the laser in a CD-R is between 4 and 8 milliwatts. CD-R discs have a section outside the standard recording area called the Program Calibration Area (PCA), which is used to adjust the laser for the brand of media you're using. The error indicates that the CD-R drive is having trouble calibrating the power setting. Try different brands of media, and if that doesn't work you should have the drive checked. Some versions of the firmware for the Philips CDD2000 and HP 4020i will report a power calibration error if you try to do a 1x write after a 4x read. Subject: [4-13] My Adaptec 2940 pauses after finding my CD-R This was observed with a Yamaha CDR-100. The solution is to go into the Adaptec BIOS (hit Ctrl-A during boot), and disable the "support removable disks under BIOS as fixed disks" option and the "boot from CD-ROM" option. ------------------------------------------------------------------------------ [ continued in part 2 of the FAQ ] -- fadden@netcom.com (Andy McFadden) [These are strictly my opinions.] PGP Friends don't let friends patent software -- http://www.lpf.org/ From ns.itep.ru!Radio-MSU.net!Gamma.RU!srcc!demos!news.stealth.net!www.nntp.primenet.com!nntp.primenet.com!howland.erols.net!netcom.com!fadden Wed Sep 11 12:45:25 1996 Newsgroups: comp.publish.cdrom.hardware,comp.publish.cdrom.software,comp.publish.cdrom.multimedia,comp.answers,news.answers Path: ns.itep.ru!Radio-MSU.net!Gamma.RU!srcc!demos!news.stealth.net!www.nntp.primenet.com!nntp.primenet.com!howland.erols.net!netcom.com!fadden From: fadden@netcom.com (Andy McFadden) Subject: [comp.publish.cdrom] CD-Recordable FAQ, Part 2/2 Message-ID: Followup-To: comp.publish.cdrom.hardware Summary: Frequently Asked Questions about CD recorders, CD-R media, and CD premastering. Sender: fadden@netcom4.netcom.com Organization: Lipless Rattling Crankbait Date: Mon, 9 Sep 1996 04:04:51 GMT Approved: news-answers-request@MIT.EDU Lines: 1195 Xref: ns.itep.ru comp.publish.cdrom.hardware:18214 comp.publish.cdrom.software:10137 comp.publish.cdrom.multimedia:8217 comp.answers:20545 news.answers:70052 Archive-name: cdrom/cd-recordable/part2 Posting-Frequency: monthly Last-modified: 1996/08/14 Version: 1.2 [ There are no changes since last time, not because nothing needs to be changed, but rather because I won't have time to do a reasonable job of it for a few weeks. Better to hold off 'til next month. ++ATM ] ------------------------------------------------------------------------------ Subject: [5] Hardware The numbers after the model name (e.g. "CDR-102 (2x4/512K)") refer to the read and write speeds of the unit and the size of the write buffer. "2x4" would be a double-speed writer that's also a quad-speed reader. If it just says "2x", the write speed is double-speed and the read speed isn't known (but presumably is at least 2x). Subject: [5-1] Which CD-R unit should I buy? Based on the experience of users posting to the comp.publish.cdrom.hardware Usenet newsgroup, the models to get are, in order: (1) Yamaha CDR-100/CDR-102 (2) Sony 920S (3) HP 4020i (4) Philips CDD522 (5) Everything else These are discussed in the next few sections. See also the "CD Recorder Specification Chart" frame on "http://www.cdarchive.com/info/default.htm", and the (somewhat Adaptec-specific but still useful) "CD RECORDABLE SUPPORT" section from "ftp://ftp.adaptec.com/pub/BBS/dos/ezlist.txt". See "http://www.cd-info.com/CDIC/Industry/Mfgrs/RecorderManufacturers.html" for company contact information. If you have specific needs, you should verify with the manufacturer that the drive will do what you need. Many of the devices are simply OEM versions of another company's recorder. It's unwise to assume that the units are equivalent, however: in many cases the firmware has been changed, and may not work as well as related models. PC Magazine recently reviewed several of these. The review was flawed for a number of reasons, but it did conclude that the two best *packages* for overall features, ease-of-use, and customer support for the hardware and bundled software were the 1002 and 4000 models from Smart & Friendly. Since these use the recorder mechanisms listed as #1 and #2 above, these would seem to be excellent choices for people who aren't familiar with PC hardware integration issues or don't want to spend a lot of time struggling with configuration problems. External drives are preferred to internal drives because of heat problems. Don't buy an internal unit unless you have exceptional ventilation in your PC case. Subject: [5-1-1] Yamaha See http://www.yamahayst.com Models are the CDR-100 (4x4/512K) and CDR-102 (2x4/512K). The CDE-100 is just the CDR-100 in a Yamaha external case (some retailers put the CDR-100 in a case and call it a CDE-100, but it really isn't -- the official Yamaha case has room for an external hard drive). It has been reported that the CDR-102 is the same mechanism as the CDR-100, but with the 4x writing feature disabled. There is no known way to convert it into a 4x writer. Note Yamaha doesn't do customer service. The dealer you purchase the drive from is expected to do this. Yamaha CDR-100s with firmware version 1.08 may experience problems when recording audio. Upgrading to version 1.10 is recommended. Since the Yamaha units don't have flash ROM (and apparently the upgrade involves more than just changing a ROM chip), the drive needs to be sent back to the dealer for the upgrade. Subject: [5-1-2] Sony See http://www.sel.sony.com/SEL/ccpg/storage/cdr/940.html See http://www.sel.sony.com/SEL/ccpg/storage/cdr/920.html Models are the CDW-900E (2x2/3MB), Spressa CDU920S (2x2/1MB), and Spressa CDU940S (2x4/1MB). The 940 is replacing the 920 in Sony's lineup. The CDW-900E has a separate connector that allows multiple "slave" drives to be daisy-chained, allowing multiple CD-Rs to be written in parallel. The Spressa 9411 is a 940 in an external case. Subject: [5-1-3] Smart & Friendly See http://www.smartandfriendly.com/ Models are the CDR1002 (2x2/1MB, based on the Sony CDU920S), the CDR1004 (4x2/512K, based on the Yamaha CDR-102), and the CDR4000 (4x4/512K, based on the Yamaha CDR-100). Subject: [5-1-4] Philips See http://www.philips.com/pkm/laseroptics/cdd522.htm Models are the CDD2000 (2x4/1MB) and CDD522 (2x2/2MB). The CDD521 (2x2/256K) is an older model; if you use one, the firmware upgrade is strongly recommended. The CDD522 does not support reading of subcode-Q data. The CDD521, CDD522, and Kodak-labeled PCD225 have a sensor that can read the barcode data from the inner ring on a CD. See the HP section for comments about the CDD2000 firmware. The firmware is kept in flash ROM, so it can be updated with software attainable over the net. You should be at version 1.25 or later for best results. Drivers are available for the CDD2000 from: http://www.philips.com/sv/pcaddon/cdr/ Subject: [5-1-5] HP See http://www.corp.hp.com/Publish/isg/cdr/html/prodinfo.html See http://hpcc998.external.hp.com/isgsupport/cdr/index.html Model is the SureStore 4020i (2x4/1MB) (sometimes identified as part number C4324), based on the Philips CDD2000 mechanism. The HP 4020i got off to a rough start because of buggy firmware and problems with the AdvanSys SCSI controller shipped with the drive. Two firmware upgrades have been made available so far (v1.20, v1.25), and most but not all problems with the firmware have been eliminated. HP recommends that users with the v1.20 firmware who aren't having problems should NOT get the v1.25 upgrade. Contact HP tech support for more information. The AdvanSys controller continues to cause problems for some users, which is made worse by HP's refusal to support people who try to use a different card. The best approach seems to be to try the card and stick with it if it works, otherwise buy an Adaptec board (e.g. the 1522A) and use it with that. There may be a newer rev of the AdvanSys board. An unofficial HP 4020i FAQ maintained by Grek Volk can be found at http://www.cd-info.com/CDIC/Technology/CD-R/HP-FAQ.html. Drivers, software, and firmware upgrades are available from: ftp://ftp.hp.com/pub/information_storage/surestore/cd-writer/ Subject: [5-1-6] Plasmon See ? Models are the RF4100 (2x2/2MB, based on the Philips CDD522) and CDR4220 (2x4/1MB, based on the Philips CDD2000). The RF4100 does not support disc-at-once recording. Subject: [5-1-7] Kodak See http://www.kodak.com/cgi-bin/webCatalog.pl?product=KODAK+PCD+Writer+225 See http://www.kodak.com/cgi-bin/webCatalog.pl?product=KODAK+PCD+Writer+600 Models are the PCD200 (2x/256K), PCD225 (2x2/2MB, based on the Philips CDD522) and PCD600 (6x). The Philips CDD522, Kodak PCD225, and Kodak PCD600 will interface with the Kodak Disc Transporter, which supports unattended duplication of up to 75 CD-Rs, making it a useful combo for CD-R production. Subject: [5-1-8] JVC See ? Models are the XR-W1001 (1x/64K), XR-W2001 (2x/1MB), XR-W2010 (?), and XRS-201 (2x2/1MB). [ XR-W2010 == XRS-201 ? ] Bundled with JVC "Personal Archiver" or "RomMaker" software. Subject: [5-1-9] Pinnacle See http://www.pinnaclemicro.com/ Models are the RCD-202 (1x, based on the JVC XR-W1001), RCD-1000 (2x, based on the JVC XR-W2001), the RCD-5020 (2x2/1MB), and the RCD-5040 (2x4/1MB, based on either the Philips CDD2000 or the JVC XR-W2010, depending on who you listen to). RCD-1000 units shipped after Sept 1995 can do audio extraction if they have firmware v2.35 or later. An upgrade is available from their BBS. Pinnacle earned a bad reputation after shipping drives with buggy firmware, a poorly ventilated enclosure, and bad customer support. Pinnacle customer support is reported to be almost nonexistent, except for some recent tech support via e-mail. Subject: [5-1-10] Ricoh See http://www.ricoh.com [site down] Models are the RS-9200CD (1x/1.2MB), RO1060C (2x2/512K), and RS1060C (2x2/512K). The RS1060C does not support Disc-At-Once recording, reading of digital audio, or subcode-Q data. (One user reported that his RO1060C *could* read digital audio, but the drive took a little convincing.) The RS1060C is also the Creative Labs CDR2000. Subject: [5-1-11] Pioneer See ? Model is the DW-S114X (4x4/1MB). Does not support Disc-At-Once recording. Mainly sold in large jukebox systems. Subject: [5-1-12] Olympus See http://www.olympusamerica.com/ [ no product page at last check ] Model is the CDS615E (2x2/1MB). The CD-R2 is the CDS615E in an external case. Subject: [5-1-13] Optima See ? Model is the DisKovery 650 CD-R (2x2/1MB), based on the Sony CDU920S. Subject: [5-1-14] Mitsumi See http://www.mitsumi.com/ [ couldn't find product info ] Model is the CR-2200CS. Subject: [5-1-15] DynaTek Automation Systems See ? Model is the CDM400 (4x4/512K), based on the Yamaha CDR-100. Subject: [5-1-16] Microboards of America See ? Model is the PlayWrite 2000 (2x2/1MB, based on the Sony CDU920S). Subject: [5-1-17] Micro Design International Model is the Express Writer (2x2/1MB, based on a Pinnacle (i.e. JVC) drive). Subject: [5-1-18] MicroNet Technology Model is the MasterCD Pro (4x4/512K, based on the Yamaha CDR-100). Subject: [5-1-19] Procom Technology Model is the PCDR-4X (4x4/512K, based on the Yamaha CDR-100). Subject: [5-1-20] Grundig Model is the CDR100IPW (4x2/1MB, based on the Philips CDD2000). Subject: [5-1-21] Plextor See http://www.plextor.com/cdr.htm Model is the PlexWriter (4x2/512K). The unit is flash upgradeable. Subject: [5-2] How long do CD-R drives last? The MTBF on these drives is typically 25,000 to 50,000 hours, and they come with a 1 year warranty. Compare that to hard drives rated at between 500,000 and 1,000,000 hours with a 3 or 5 year warranty and that should give you some idea. Most of the drives available weren't meant for mass production; notable exceptions are the Philips CDD 522, Kodak PCD 600, and Sony CDW-900E. Incidentally, MTBF is not an estimate of how long the drive will last. Rather, it's an estimate of the failure rate of the drives during the expected lifetime of the device... after a year or two, the anticipated failure rate increases. If you have new drives with an MTBF of 25,000 hours, and you run 1000 units for 100 hours, you can expect to see four of them fail. It does NOT mean you can expect them to run for 2.8 years and then all fail at once. Subject: [5-3] What kind of PC is recommended? If you're about to buy a computer system and are seriously thinking about buying a CD-R, here are some things to keep in mind. (See the next section if you're interested in Mac hardware instead of an IBM PC.) CPU: buy a Pentium, the faster the better. This is true in general, since systems tend to be outdated after a year and obsolete after three or four. A '486 is a *minimum* configuration for a CD-R system; a Pentium gives you some breathing room. P6 is probably overdoing it. Motherboard: get one with PCI slots. Not only can PCI cards move data more quickly, they're much easier to configure. SCSI: you need a SCSI interface, not just IDE/EIDE. Whether it's built into the motherboard or on a separate card, make sure the host adapter supports ASPI and ASPI for Windows (see section 5-7). Don't bother with Wide SCSI unless you're planning to buy a disk array or fancy devices - even current 7200rpm drives don't exceed the limits of 8-bit Fast SCSI anyway. Bus mastering SCSI cards are preferred over non-bus-mastering cards, though it's less important if the hard drive and CD-R are on different controllers. Sound: the Creative Labs SB16 and AWE32 boards are widely supported and very popular, but if you're thinking seriously about recording sound through it, you'll want to consider alternatives. See sections (3-12) and (3-13) for other options. Hard drive: needs to be fast, and large enough to hold whatever data you plan to put on a CD. See section (5-6). Video card and monitor: depends on what you want to do. A PCI-based video card is a good idea (though more expensive than an ISA-based card), and a 15" or 17" monitor will work fine for most applications. If you're planning on creating multimedia products, you'll want a PCI video card and a good 17" monitor. CDROM: for a variety of reasons, you'll probably want a SCSI CDROM rather than an IDE CDROM. See section (5-5). Subject: [5-4] What kind of Mac is recommended? Any Mac of Quadra 700 or higher capability with a reasonably fast disk should be suitable for 2x writing (PowerBooks excepted). All PowerMac-class machines, and probably most Mac clones, should work fine. Block-by-block copies are the best way to create discs. If your pre- mastering software has to assemble files and build an ISO filesystem on the fly, you will need a high-end PowerMac. The above hardware may still be suitable for on-the-fly mastering, but as a general case, building a prototype image to a disk or disk partition will be safer. Using the "simulated cut" feature available on Toast and other software is also prudent. (Macintoshes, as a rule, have lousy I/O, notably in the filesystem and network. Fortunately, the lack of preemptive multitasking keeps things flowing at a constant rate. As an additional bonus, most internal Mac CDROM drives can do digital audio extraction with the appropriate software.) Subject: [5-5] Which standard CDROM drives work well with CD-R? Besides the obvious question - can it read CD-R discs that you create - there's also the question of how well the drive works as the source device when copying discs. To be more specific: - Does the drive support digital audio extraction? - Does the drive hog the SCSI bus, obstructing writes to the CD-R? - Does the drive support multisession discs? Toshiba and Plextor SCSI models generally work well. The Plextor 6Plex and 8Plex can extract digital audio at high speeds, and come with a set of utilities that are actually useful. NEC models tend to hog the SCSI bus. Older NEC models (especially the NEC 3x) and some Mitsumi models have trouble reading CD-Rs. There is one hard and fast rule for direct CD-to-CD duplication: the source drive must be faster than the target drive (e.g. source 4x if target is 2x, source 6x if target is 4x). Subject: [5-6] What kind of HD should I use with CD-R? Must it be AV-rated? There is a fair amount of confusion over what exactly is an "AV drive". A brief discussion is presented here; for more information see Bertel Schmitt's article at ftp://ftp.netcom.com/pub/fa/fadden/avdrive.txt. The most important issue is thermal recalibration. Your basic hard drive will pause for up to half a second (or even up to a full second, depending on who you believe) every so often to adjust the head positioning to the current operating temperature. For most applications this goes unnoticed, but when recording a CD-R you must write the current track to completion without interruption. AV drives deal with the problem in a way that doesn't disrupt the disk activity. A drive that does a quick thermal recalibration is acceptable if the system is otherwise fast enough or the buffer in the CD-R unit or in the recording software is large enough (early drives had only 64KB, while current drives have 512KB or 1MB, making it much less of an issue). You need to be sure that the recorder's write buffer won't empty during the recal period, or you'll end up with a buffer underrun. If your recorder's buffer is less than 512KB, or you're planning to record at 4x or greater, you should seriously consider an AV drive. Otherwise, it probably won't matter. Also, don't believe everything you hear from a salesman -- verify with the manufacturer that the drive model is AV-rated. What separates a Seagate Barracuda from a Seagate Barracuda AV is that the latter is tuned for AV performance. This is simply a software change that affects cache allocation algorithms, error correction, and other SCSI parameters that may will give better performance for transfers of large blocks of contiguous data. These sorts of optimizations are more important for digital video (which runs at a few MB/sec) than CD recording (which is only 600K/sec at 4x). If you think AV optimizations will help you, you should take a look at "Dr. SCSI" at http://www.scsitools.com/. It will help you do the same optimizations that the AV drive sellers do, for a price that's about equal to the difference between a standard drive and an AV drive. Subject: [5-7] What kind of SCSI adapter should I use with CD-R? Using different SCSI adapters for the HD and the CD-R used to be recommended, but may not be necessary with non-ISA adapters. If your CD-R hogs the SCSI bus the HD may not be able to keep the write buffer full. Under some operating systems, particularly OS/2, devices that support SCSI disconnect will work better than those that don't. In general, the faster the better. PCI or VLB is better than ISA, and the board should support (and have enabled) SCSI disconnect. The Adaptec 2940 (PCI) is a popular choice, though some users have reported problems with the Adaptec 2840 (VLB). See the README that comes with Adaptec EZ-SCSI v4.0 and later for some things to try with SCSIBench to make sure that you're going to get enough throughput on a single SCSI bus. The adapter MUST support the ASPI standard (ASPI provides an interface between software and the SCSI controller) for both DOS and Windows. Subject: [5-8] Can I use a CD-R as a general-purpose reader? You can, but it's not clear that you'd want to. The seek times tend to be slower than a standard CDROM drive because the head assembly is heavier. There's also not much need for rapid seeks when writing a disc, so there's little reason for manufacturers to try to optimize this. Some users have reported jerky video playback on a CD-R drive. The MTBF on CD-R units tends to be low, so it may be wise to use a different drive for general use to preserve the life of the CD-R. In addition, if you're using Win95, some CD-R devices don't show up as readers without additional drivers, or show up as 8 separate LUNs (Logical UNits, useful for CD jukeboxes). HP and Philips supply drivers for their units, Corel supplies several for different devices, and the Sony 920S works as-is. If you have Adaptec Easy-CD 95, you can get a patch from Adaptec at ftp://ftp.adaptec.com/pub/BBS/win95/cdr4up.exe that will allow Yamaha CD-R drives to appear as CDROM drives. If you don't have the drivers, you can still get it to work by loading the real-mode drivers like this (example is for an Adaptec 2940): In Config.sys: DEVICEHIGH=C:\SCSI\ASPI8DOS.SYS /D DEVICEHIGH=C:\SCSI\ASPICD.SYS /D:ASPICD0 In Autoexec.bat: LH C:\WINDOWS\COMMAND\MSCDEX.EXE /D:ASPICD0 /M:12 ------------------------------------------------------------------------------ Subject: [6] Software PC users may be better off with Win31 than Win95. While many people have had great success under Win95, several users have found that they have a better chance of success under DOS or Win31. Mac System 7.x works well. UNIX variants (notably FreeBSD and Linux) work, but there aren't a lot of people using them to create CD-Rs. Subject: [6-1] Which software should I use? Generally speaking, you get what you pay for; the more expensive software has more features. However, this isn't always the case, and the software with more features isn't necessarily more reliable. Subject: [6-1-1] Adaptec - Easy-CD, Easy-CD Pro, and Easy-CD Pro MM Platforms supported: Windows (3.1, 95/NT), Mac See http://www.adaptec.com/cdrec The software was developed by a company called Incat, which was purchased by Adaptec in 1995. A version of Easy-CD is part of the Adaptec EZ-SCSI 4.0 utilities. Easy-CD Pro is generally considered to be the best of the PC software. Subject: [6-1-2] Adaptec - CD-Creator Platforms supported: Windows, ? The software was developed by Corel, and published by them until it was purchased by Adaptec in mid-1996. The package includes drivers that allow several popular CD-R drives to be used as general-purpose CD readers under Win95. Version 2.x is a considerable improvement over version 1.x. Subject: [6-1-3] Elektroson - GEAR Platforms supported: DOS, Windows, OS/2, UNIX, Mac. See http://www.oneoffcd.com/cdprod/gear.htm This is bundled with some drives. It has been described as "low end". Subject: [6-1-4] Astarte - TOAST CD-ROM Pro Platforms supported: Mac. See http://www.cdarchive.com/hwsw/default.htm (demo available) This package is recommended for making Mac/PC hybrids, and is the most popular package for the Mac. It has also been sold as "CDitAll". Software updates are available on the web. Subject: [6-1-5] CeQuadrat - WinOnCD ToGo Platforms supported: Windows See http://www.cdarchive.com/hwsw/default.htm (demo available) Has been described as "low end", but has the fastest VCD (Virtual CD) database creation. Subject: [6-1-6] Young Minds, Inc. - SimpliCD Platforms supported: Windows See http://www.cdarchive.com/hwsw/default.htm (demo available) See http://www.ymi.com/ Has been described as "low end". Subject: [6-1-7] ? - CD-Producer Platforms supported: Windows See http://www.cdarchive.com/hwsw/default.htm Subject: [6-1-8] Jeff Arnold - CD utilities Platforms supported: DOS. See http://www.mainstream.net/~jarnold/cdrom/cdrom.html These run under DOS. Contains sophisticated CDROM duplication programs, track-at-once and disc-at-once utilities for sound and data, and other goodies. Some of the software is free, the rest are relatively inexpensive. These come highly recommended for creating audio CDs. Updates for the software are available on the net. Subject: [6-1-9] Optical Media International - QuickTOPiX Platforms supported: Windows (3.1, 95/NT), Mac. See http://www.oneoffcd.com/cdprod/qt.htm See http://www.cdarchive.com/hwsw/default.htm Mac versions can make "shared" hybrids. Subject: [6-1-10] Creative Digital Research - CDR Publisher Platforms supported: Windows, UNIX See http://www.cdr1.com/ Can create Mac/PC/UNIX hybrid CDs, as well as bootable CDs for PC and UNIX. The Solaris version should be availble through Sun's Catalyst program; see http://www.sun.com/sunsoft/catlink/cdr/cdrpub.htm. Subject: [6-1-11] mkisofs Platforms supported: UNIX See ftp://tsx-11.mit.edu/pub/linux/BETA/cdrom/mkisofs-1.05.tar.gz This allows creation of a prototype ISO-9660 filesystem on disk or tape, which can then be copied to a CDR. It supports the Rock Ridge extensions, and can be configured to ignore certain facets of the ISO standard (like maximum directory depth). The package includes a "cdwriter" program that is apparently used by Yggdrasil to produce their UN*X distributions. It requires a working worm device driver. The program was developed on a Philips CDD52x, and success has been reported with the HP 4020i under Linux and FreeBSD. Users without a supported drive can still write the image to an MS-DOS drive, and then use a program like Arnold's FILE2CD to write the image. Subject: [6-1-12] Asimware Innovations - MasterISO Platforms supported: Amiga See http://www.asimware.com/ (demo available) Your basic CD-R mastering package for the Amiga. Subject: [6-2] What other useful software is there? Software related to CD-Rs that isn't a direct part of the premastering process. Subject: [6-2-1] Optical Media International - Disc-to-Disk Platforms supported: Windows (3.1, 95/NT), Mac. See http://www.oneoffcd.com/cdprod/d2d.htm Fancy extraction from audio CDs. Subject: [6-2-2] Gilles Vollant - WinImage Platforms supported: Windows See http://ourworld.compuserve.com/homepages/gvollant/winimage.htm Among other things, this lets you list and extract the contents of an ISO-9660 image. Subject: [6-2-3] Asimware Innovations - AsimCDFS Platforms supported: Amiga See http://www.asimware.com/ Allows the Amiga to read High Sierra, Mac HFS, and ISO-9660 (including Rock Ridge extensions). Subject: [6-2-4] Steven Grimm - WorkMan Platforms supported: UNIX See http://www.hyperion.com/ftp/WorkMan/ In addition to its primary role as an audio CD player for UNIX workstations, version 1.4 (still in beta) allows SPARC/Solaris2.4+ workstations to extract digital audio into ".au" files. Subject: [6-2-5] Adaptec - Easy-CD Backup Platforms supported: Windows Backup software designed to store data on CD-Rs. Allows incremental backups via multi-session writes. Subject: [6-2-6] Hohner Midia - Red Roaster Platforms supported: Windows See http://hohnermidia.com/proaudio.html Not entirely sure what this does; the "rrdemo.zip" on the web site is actually a demo of Samplitude Master from SEK´D Software. Samplitude Master is a fancy audio editing program that - among other things - allows you to create ISO images suitable for writing to a CD-R, but the demo package doesn't include software to do the actual writing. Subject: [6-3] What is packet writing software? Packet writing is an alternative to writing entire tracks or discs. [ Need more info here. ] Drives based on the Sony 920S and Philips CDD2000 mechanisms are capable of packet recording. Announcements of software that use this can be found at: http://www.cd-info.com/CDIC/Technology/CD-R/Premastering/flexcd.html http://www.cd-info.com/CDIC/Technology/CD-R/Premastering/SonyCD-RFS.html Specifications for the Sony CDR-FS stuff can be found at: ftp://ftp.dss.sel.sony.com/pub/cdrfs ------------------------------------------------------------------------------ Subject: [7] Media This section covers recordable CD media. Subject: [7-1] What kinds of media are there? The basic building blocks of CD-R media are "green" dye (cynanine) and "gold" dye (phthalocyanine). Taiyo Yuden produced the original green CDs, which were used during the development of CD-R standards. Mitsui Toatsu Chemicals invented the process for gold CDs. See section (7-3) for details on who manufactures what. There are gold/gold, green/green, and green/gold CDs. A new kind of media, silver/blue (metalized azo dye, also based on cynanine, with a silver alloy substrate) exists but is still somewhat rare. It appears to have a very low BLER (BLock Error Rate), comes with a scratch-resistant coating, and is reputed to be more resistant to UV radiation, but their lifespan relative to green and gold media has yet to be determined. The process is patented by Verbatim. Some CDs have an extra coating (e.g. Kodak's "Infoguard") that makes the CD more scratch-resistant, but doesn't affect the way information is stored. Subject: [7-2] Does the media matter? Yes. There are three factors to consider: (1) How long does it last before it starts to decay? (2) What's the typical block error rate for the media? (3) Which CD readers can use it? Some audio CD players (like the ones you'd find in a car stereo) have worked successfully with one brand of gold media but not another. Some players fail completely with green, some fail completely with gold, some only work with blue. Some people have found brand X CD-R units work well with media type Y, while other people with the same unit have had different results. Recording a disc at 4x may make it unreadable on some drives, even though a disc recorded at 2x on the same drive works fine. To top it all off, someone observed that discs burned with one brand of CD-R weren't readable in cheap CDROM drives, even though the same kind of media burned in a different device worked fine. A number of specific discoveries have been posted to Usenet, but none of them are conclusive. Subject: [7-3] Who manufactures CD-R media? Taiyo Yuden made the first "green" CDs. They are now manufactured by TDK, Ricoh, and Kodak as well. Mitsui Toatsu Chemicals (MTC) made the first "gold" CDs. They are now manufactured by Kodak as well. Verbatim made the first "blue" CDs. They are the only manufacturer. Most CD-R brands (e.g. Yamaha and Sony) are OEMed from one of the above manufacturers. Subject: [7-4] Which kind should I use? The Orange Book standard was written based on the original "green" discs from Taiyo Yuden. Green media is more forgiving of marginal read/write power variations, making them easier to read on some drives. TDK's media is a popular (if not the most popular) choice. Gold media has a longer lifespan and may work better in higher speed recording. Mitsui's gold/gold discs are recommended by some vendors, and in some informal and unscientific tests were more compatible with car CD players than Kodak gold or TDK green discs. Trying samples of blanks is strongly recommended before you make a major purchase. Remember to try them in your reader as well as your writer; they may not be so useful if you can't read them in your normal CDROM drive. See also "Is There a CD-R Media Problem?" by Katherine Cochrane in the Feb '96 issue of CD-ROM Professional. Subject: [7-5] How long do CD-Rs last? The manufacturers claim 75 years (green dye) or 100 years (gold dye). Exposing the disc to excessive heat, humidity, or to direct sunlight will greatly reduce the lifetime. In general, CD-Rs are far less tolerant of environmental conditions than pressed CDs, and should be treated with greater care. See also http://www.cd-info.com/CDIC/Technology/CD-R/Media/Longevity.html Subject: [7-6] How much data can they hold? There are 21-minute (80mm), 63-minute (120mm), and 74-minute (120mm) CD-Rs. These translate into data storage capacities of 184MB, 553MB, and 650MB, respectively (note these numbers are approximate). You lose a little space because of the leadin and leadout areas, which occupy about 15MB, but you may gain a little space over storage on a hard drive because the "cluster" size is only 2K. Folks interested in "doing the math" should note that only 2048 of each 2352-byte sector is used for data on typical (Mode 1) discs. The rest is used for error correction and other misc fields. This is why you can only put 650MB of data on a disc that will hold 740MB of audio. It should also be noted that hard drive manufacturers don't measure megabytes in the same way that CD-R and RAM manufacturers do. The "MB" for CD-Rs and RAM means 1024x1024, but for hard drives it means 1000x1000. Keep this in mind when purchasing a hard drive that needs to hold an entire CD. A data CD holds about 682 "disk" MB of data. Factory-recorded CDs hold up to 74 minutes of data (but see section (3-8)). Subject: [7-7] Is it okay to stick a label on the disc? Only if you're careful. Some adhesives can dissolve the protective lacquer coating if the adhesive is based on a solvent that the lacquer is susceptible to. Specific information can sometimes be found on the back of the jewel case that the discs come in; the TDK CDR-74 discs have the following warning: [...] 2. Do not attach labels or protective sheets, or apply any coating fluids to the disc. 3. When writing titles and other information on the label (gold) side of the disc, these should be written in the printed area using an oil-based felt-tipped pen. [...] Other brands say "use a permanent felt-tipped pen" or words to the effect that the ink shouldn't smudge. Most important part is to use a felt tip pen and not a ball-point, because the top layer is somewhat delicate. Several people have reported good luck with Sanford "Sharpie" pens, but make sure you don't etch the surface accidentally if you have an "Ultra Fine" pen. Dixon Ticonderoga sells a water-based felt tip marker called "Redi Sharp Plus" that is both permanent and smear-proof. Only use labels made specifically for recordable CDs. Attempting to remove the label once attached is probably a bad idea. ProSource Sales & Marketing, Inc. sells labels and an applicator that are reputed to work well. See also http://www.neato.com/ for information on the NEATO CD-Label kit (complete with animated illustrations). Subject: [7-8] What are audio CD-Rs? An audio CD-R recorder is similar to normal CD recorders, except that it's more expensive, requires special audio CD-R blanks that cost considerably more (roughly $25 vs $6) and only hold 60 minutes of data, and may employ SCMS (Serial Copy Management System) to prevent making copies from a copy. The difference in price is due to licensing agreements and volume. The manufacturer pays a royalty to a studio consortium under the assumption that everything recorded to an audio CD-R is pirated material. The technology is identical; the "audio" discs just have a mark that says a royalty has been paid. A less expensive solution for audio recording is to get a good audio digitizer, record onto a hard drive, and then write the recorded data onto a CD as digital audio data. See sections (3-12) and (3-13). Subject: [7-9] How do CD-Rs behave when microwaved? Disclaimer: I'm not recommending you put a CD into a microwave. CDs may contain metals that will cause your microwave to arc, destroying the microwave emitter (see cautions about metal objects in the manual for your microwave). Don't try this at home. Better yet, don't try this at all. The basic process is, take a disc that you don't want anymore, and put it shiny-side-up on something like a mug of water so it's nowhere near the top, bottom, or sides of the microwave. (Actually, you may want to leave it right-side-up if the disc doesn't have a label, because the foil is closest to the top of the CD). Turn off the lights. Program the microwave for a 3-second burst, and watch the fireworks. Performing this operation on replicated CDs results in blue sparks that dance along the CD, leaving fractal-ish patterns etched into the reflective aluminum. For those of you not with the program, this also renders the CD unreadable. Trying this with a green/gold CD-R gives you a similar light show, but the destruction patterns are different. While pressed CDs don't show much of a pattern, the TDK green CD-R I'm looking at (stupid Incat error handling) shows some definite circular patterns. On a different note, CD-Rs seem to smell worse, or at least they start to smell earlier, then replicated CDs. The materials used are non-toxic, but breathing the fumes is something best avoided. Subject: [7-10] What can I do with CD-R discs that failed during writing? If the disc wasn't closed, you can write more data in a new session. If the disc was closed, or was nearly full when the write failed but is still missing important data, then its use as digital media is over. However, that doesn't mean it's useless. Here are a few ideas: - Fill in the center hole to avoid leaks, and use them as drink coasters. - Create a hanging ornament or wind chime. The latter isn't all that interesting - they just sort of "clack" a little. - Use them as mini-frisbees in an office with cubes. Since they're rather solid and may hurt when they hit, you should await a formal declaration of intra-office war before opening up with these. - Have CD bowling tournaments where you see how far you can roll one down a narrow hallway. You'd be surprised at how hard it can be unless you get the wrist motion just right. - Put them under a table or chair whose legs don't quite sit right. - Run them through one of those industrial-strength paper shredders (the kind with the rapidly spinning wheels) to get shiny green or gold confetti. - Make really, really big earrings. - Try to convince people at the beach that it's a shell from a new species of abalone. - Hook them into your bicycle spokes as reflectors. - Use them as wheels on a toy car. (If you had buggy firmware, you're probably stocked for a toy 18-wheeler.) - Build a suit of "CD-R chain mail" for laser-tag games. - Use them as art-deco floor or ceiling tiles. - Hang them from the rear view mirror in your car. ------------------------------------------------------------------------------ Subject: [8] Net Resources and Vendor Info Some of these sites have both technical information and product sales; they're listed twice. The CD-Info bibliography at http://www.cd-info.com/CDIC/Bibliography.html is updated more frequently and will probably be more accurate than this section. It also has pointers to books, magazines, relevant areas on commercial online services, and other good stuff. Subject: [8-1] Information resources http://www.cd-info.com/ Information about CDs and CD-Rs, especially technology and industry stuff. http://www.cdarchive.com/ Lots of information on CDs and CD-Rs. ftp://ftp.cdrom.com/pub/cdrom/faq Information and FAQs from the alt.cd-rom group. http://www.araltd.com/whatscdr.html Product information plus some nifty graphics. http://www.hsv.tis.net/disc/ Technical info. http://emf.net/~mal/cdplus.html Info on CD Plus (a/k/a CD Extra). http://www.tc.umn.edu/nlhome/g496/eric0139/Papers/paper.html Highly technical data on CDs. http://www.compulink.co.uk/~xi/hp4020i.htm Site dedicated to the HP4020i. http://www.telalink.net/~epool/mtc/mtc_02.html Information about CD-R in general and Mitsui Toatsu media in particular. http://www.octave.com/ricoh/handbook.html Ricoh's CD Recordable Handbook in HTML form. http://www.medfac.unimelb.edu.au/raulssite/docs/playstation_copy.html Playstation backup FAQ http://www.tardis.ed.ac.uk/~psyche/pc/cdrom/CDDA.html Information and links to software for digital audio extraction. Subject: [8-2] Magazines and other publications http://www.onlineinc.com/ CD-ROM Professional magazine. http://www.kipinet.com/ Several publications which may be of interest. Subject: [8-3] Net.vendors http://www.mainstream.net/~jarnold/cdrom/cdrom.html Jeff Arnold's CD-R page; freeware and inexpensive DOS-based software http://www.com/mediasource/ Hardware and media. http://www.cdarchive.com/ Hardware, software, and media. http://www.mediacity.com/NCA/6removables.html NCA's online catalog. http://www.oneoffcd.com/ One-off CDs and CD reproduction; also hardware, software, and media. http://www.datares.com/cretek.htm Media and hardware. http://www.araltd.com/ Media and hardware. http://www.inter-look.com/prosource/ Media and hardware. http://sweb.srmc.com/andys/index.html grasser's SCSI wholesale page. http://www.microtech.com/ CD-R duplication hardware and services. http://www.netzone.com/syntrillium Cool Edit (.WAV editing) software site. http://www.cdrmicro.com/ Media and hardware. http://www.digitalaudio.com/products.htm Hardware for transferring audio from digital (DAT) or analog sources. http://archive.uwp.edu/zefiro Hardware for transferring audio from digital sources. http://www.adbdigital.com Hardware for transferring audio from digital sources. http://www.hk.linkage.net/~metro Hardware, software, and media. http://www.octave.com Hardware and software. ------------------------------------------------------------------------------ Subject: [9] Contributors Most of the information contained in this FAQ was culled from the Usenet newsgroups comp.publish.cdrom.* and the WWW sites mentioned in the previous sections. Please remember that the author is NOT a CD-R expert, so sending him mail won't get you very far. Please *post* questions to comp.publish.cdrom.*. This FAQ was assembled by: Andy McFadden fadden@netcom.com With a great deal of help from: Katherine Cochrane katherine@cd-info.com Hal Rottenberg hal@mediasourceinc.com Georges Brown Georges@cdarchive.com And information and suggestions -- mostly in the form of posts to comp.publish.cdrom.{hardware,software,multimedia} -- from: Pierre-Yves Andri PierreYves.Andri@ping.be Jeff Arnold jarnold@mainstream.net Blaine blam1@aol.com Jim Blietz entexse@interaccess.com Peter 'Pedro' Blum peter@microtech.com Patrick Boen patrick.boen@tip.nl Eric Jan van den Bogaard bogaard@euronet.nl Axel Booltink ab@comex-sales.com Scott Bracken scott@oneoffcd.com Simon Brownlee simon.brownlee@jrc.it Craig Burgess craigb@microstar-usa.com Brian D. Chambers bucknife@electriciti.com Dave Chung dtchung@vms6.sci.csupomona.edu Kevin Clark clark@crl.com Jef Collin Jef.Collin@tornado.be Gary Crosby gacrosby@mail.socomm.net Steven M. Dietz steve@burp.hboc.com Russell Duffy rad@gulf.net Jonathan Edelson winnie@teleport.com Grant Erickson eric0139@itlabs.umn.edu Tung Siu Fai sftung@metro.com.hk Frank Feder fwfeder@deltanet.com Joel Finkle jjfink@skcla.monsanto.com Emile Gardette egardett@freenet3.scri.fsu.edu E. Goldberg earl@sky.net Colin Gordon gordonc@oldpeter.agw.bt.co.uk Jac Goudsmit jacg@xs4all.nl Gary E. Grant ggrant@crl.com grasser grasser@srmc.com Patrick Green patrick@bbs.fornext.com Richard Green srcemag@gate.net Dave Grimes dgrimes@cts.com Ron Gustavson rongus@tiac.net Russ Harper topquark@niia.net Steve Holzworth sch@unx.sas.com Vincent van't Hoog hoog@zeelandnet.nl Malcolm Humes mal@emf.net Tapio Keih{nen dio@snakemail.hut.fi Roger A. Kendall kendall@ucla.edu Jerry Kohoutek jerryk@rmii.com Alexander S. Kosiorek alex_audio@interramp.com Lemarcha lemarcha@plg.u-nancy.fr Wee-Keong LIM keong@deepdene.ecr.mu.oz.au Linda linda@htp.net George Lindholm lindholm@ucs.ubc.ca Mike Linhart mlinhart@rsl.ukans.edu Torbjörn Lindgren tl@funcom.com Chris HP Lovecraft tmservo@ksu.ksu.edu John Marvin jsm@fc.hp.com Anthony McCarthy anthony@xi.compulink.co.uk Doug McFadyen dmcfadye@kea.bc.ca Gene Miller gmiller@vnet.ibm.com Mikrichter mikrichter@interramp.com Hans Mons ehv.cp.philips.com Niderost, B.U. niderost@fys.ruu.nl Jon nobody nobody@nowhere.net David Oseas davido@aimla.com Dana Parker danapark@ix.netcom.com Jeff Pearson lumpofcoal@aol.com Jason Petrait petrait@u.washington.edu Jaap v.d. Pol jaap.van.de.pol@tip.nl Kevin Purdy kpurdy@voicenet.com Paul Reeves reeves@guy.asimware.com Paul Rubin phr@netcom.com Michael Rubin mickster@li.net Torsten Sander ints@sun.rz.tu-clausthal.de Nick Sayer nsayer@quack.kfu.com Bertel Schmitt bschmitt@panix.com Barbara Severance digihorse@earthlink.net Shawn shawnl@jax.jaxnet.com Brett Sherris bsherris@li.net J. Robert Sims, III robsims@depeche.lvld.hp.com Eric Smith eric@goonsquad.spies.com Tim Smith tzs@coho.halcyon.com Deirdre' Straughan 74431.2004@CompuServe.COM Ron Stuurman rons@bart.nl Paula Terrell paula@cdr1.com Gregory Theulings marcomlo.pkm@nl.cis.philips.com Kevin Patrick Thibedeau thibedek@wpi.edu tRIs sis5264@sis.port.ac.uk Louis Tumbao tumbao@usa.pipeline.com Chris Valentine c.p.valentine@open.ac.uk Vo, Charles H. st3wr@rosie.uh.edu Greg Volk gvolk@umr.edu Gilles Vollant 100144.2636@compuserve.com Wanderer wanderer@li.net Mark Warbington markoni@mindspring.com Gerald E. Weber geweber@hiwaay.net Jerome H. Whelan whelanj@oasys.dt.navy.mil Royce White cd001456@interramp.com Roy Worthington royw@octave.com Zohar Ziv zziv@actcom.co.il My humble apologies to anyone I've omitted. ++ATM 960814 ------------------------------------------------------------------------------ -- fadden@netcom.com (Andy McFadden) [These are strictly my opinions.] PGP Friends don't let friends patent software -- http://www.lpf.org/